golden prix tr-02

Unleash the Power Layer!
Our unique lamination technology redefines the standard shot with a newly developed power-layer carbon clubface.
POWER LAYER CARBON FACE

This power layer is super!

Hit it solid and send it flying with unstoppable power!

DRIVER

Send your ball flying with our power-layer carbon face!
Golfers of all levels can enjoy the distinct advantages of a carbon face: a uniquely soft feel at impact and a straighter trajectory.

Our newly developed power-layer carbon face significantly increases both strength and repulsive performance, yielding a greater increase in distance.
Now, golfers of all levels can enjoy the distinct advantages of a carbon face: a soft feel at impact and a straighter trajectory.

Both strength and repulsive performance are improved.

Inserting these special power layers enhances the deflection of the thick carbon face.
By using precision compression molding on carbon sheets containing power layers, both strength and repulsive performance are improved.

The power layer causes it to deflect considerably.
Power-layer carbon Compression of the power layer within the clubface causes it to deflect considerably. Robotic swing tests show an impressive increase of approximately 1.3m/s in initial ball velocity! Carbon only The face is thick and resists deflection
A newly developed power-layer carbon face.
Swing robot performance test Initial velocity increased by approximately 1.3m/s with power layer Distance increased by approximately 5yds
Carbon face is different from other companies.

A special rough coating applied to the clubface increases friction.
This limits the ball's slipping, resulting in a straighter trajectory. The textured clubface also helps reduce slipping on rainy days.

High-friction coating create straighter trajectory

FAIRWAY WOOD

The FW#3 lineup: for golfers seeking a stronger trajectory and greater distance.

Loft angle 14.5degrees

Achieve greater distance than a typical FW#3 with the 411 titanium integrated cup face.

Adjust weight and trajectory with the Trajectory Control System (T.C.S.) and interchangeable weights design.

It’s easy to use even for tee shots, thanks to a clubface that’s taller than a typical FW#3.

UTILITY

Designed for a high trajectory, made possible by its ultra-low center of gravity.

A carbon crown and thick sole create a low center of gravity for a high trajectory.

Using a strong X37 maraging steel integrated cup face yields exceptional thinness that maximizes repulsion.

A carbon crown and thick sole create a low center of gravity for a high trajectory.

Using a strong X37 maraging steel integrated cup face yields exceptional thinness that maximizes repulsion.

IRON / WEDGE

The “U-cup face” offers an overwhelming shot distance and a soft hitting feel.

U-cup face effectiveness

Ball strike of a typical amateur golfer

Beneficial for amateur golfers.

Most amateur golfers tend to strike the ball with the lower half of the clubface.
That's why the U-cup face, which produces powerful shots even on lower-face strikes, is especially beneficial for amateur golfers.

<#5/#6/#7> U cup face Bending the face into a U-shape increases its repulsive power, resulting in higher initial ball velocity. Direction and distance remain consistent because repulsive power stays strong even when hitting the ball with the lower part of the clubface. Inner bridge The combination of the inner bridge structure and thick sole creates a low center of gravity, allowing you to aim for the green with a high trajectory. Soft stainless
<#8/#9/PW> Pursuit of reproducibility Offers stability with a high moment of inertia, thanks to the maraging steel face's repulsive performance and peripheral weight distribution.
< 48/ 52 / 56 > Easy handling and prevent digging bounce The loft design in 4-degree increments makes it suitable for precise distance control within 100 yards. The 3D bounce, featuring reduced bounce at the toe and heel, makes it easier to open the clubface and ensures a smoother swing-through.

OTHER PRODUCT SPECIFICATIONS

SHAFT

Amazing restoration High flexural modulus of 70 tons

Cross carbon sheets are used for all categories and lengths

Our shafts were developed in collaboration with Mitsubishi Chemical Corporation to provide high stability, making it easier to launch your ball. The use of 70-ton cross carbon throughout the entire length of the shaft improves flex recovery compared to standard shafts, resulting in greater head acceleration and reduced vibration at impact. Additionally, the double kick stiff shaft helps your ball fly straighter, offering both stability and distance. Finally, Tsuruya’s unique deflection curve unification theory ensures consistent swing timing across all club numbers by standardizing shaft flexion.

Trajectory Control System (T.C.S.)

Driver (460MAX, 450LS)/
Fairway wood (#3+)

Equipped with a T.C.S. (Trajectory Control System) that allows adjustment of loft, lie, and face angles, as well as the ability to change the loft angle by ±1.5º. Changing the angle enables you to adjust the trajectory.

swipe

UP・RIGHT HIGHER1.5° STDLOFT LOWER1.5°
Loft angle (Real loft) ±0 +0.5 +1.0 +1.5 +1.0 +0.5 ±0 −0.5 −1.0 −1.5 −1.0 −0.5
Lie angle +3.0 +2.5 +2.0 +1.5 +1.0 +0.5 +0 +0.5 +1.0 +1.5 +2.0 +2.5
Face angle ±0 +1.0 +2.0 ±0.3 +2.0 +1.0 ±0 −1.0 −2.0 −3.0 −2.0 −1.0

* Plus (+) of the face angle modulates the direction to CLOSE and minus (-) to OPEN. For a higher trajectory or a higher ball catching degree → Set to HIGHER.

Tsuruya Golf Product Lineup by
Clubhead Speed (m/s)

PRODUCT SPECIFICATIONS

DRIVER

Pure carbon shaft
TENSEI for GOLDEN PRIX TR-02 (Mitsubishi Chemical)

swipe

*When the sleeve position is STD LOFT

FAIRWAY WOOD

Pure carbon shaft
TENSEI for GOLDEN PRIX TR-02 (Mitsubishi Chemical)

swipe

*When the sleeve position is STD LOFT

UTILITY

Pure carbon shaft
TENSEI for GOLDEN PRIX TR-02 (Mitsubishi Chemical)

swipe

IRON / WEDGE

① Pure carbon shaft
TENSEI for GOLDEN PRIX TR-02
(Mitsubishi Chemical)

② Steel Shaft
N.S.PRO 950GH neo
(Nippon Shaft)

Single item [#5]

Set of 5 [#6〜9,PW]

Each [48,52,56]

swipe

HIKONE FACTORY

MADE IN JAPAN QUALITY

TSURUYA GOLF manufactures original brands at its own factory.
We are pursuing the highest quality clubs
to boost the capability of golfers.